{"id":3074,"date":"2026-10-15T14:40:42","date_gmt":"2026-10-16T02:40:42","guid":{"rendered":"https:\/\/footworklab.net\/?p=3074"},"modified":"2026-10-15T14:40:42","modified_gmt":"2026-10-16T02:40:42","slug":"dynamic-plantar-pressure-mapping","status":"publish","type":"post","link":"https:\/\/footworklab.net\/fr\/news\/3074\/","title":{"rendered":"Dynamic Plantar Pressure Mapping: What a Recording Shows, and What It Leaves Out"},"content":{"rendered":"<div class=\"fwl-author\">\n<p><strong>About the author<\/strong> \u2014 FOOTWORK LAB is a manufacturer of foot<br \/>\nassessment equipment and custom orthotic insoles, based in Ruichang, Jiangxi Province, China.<br \/>\nFounded in 2014, with its own production plant since 2018. Certified to European Union and ISO<br \/>\nquality system standards. <a href=\"\/our-factory\/\">See the factory<\/a> or<br \/>\n<a href=\"\/certificate\/\">view certification<\/a>.<\/p>\n<\/div>\n<p class=\"fwl-lead\"><strong>A dynamic plantar pressure map is a record of how load moves under the<br \/>\nfoot during movement, and its value depends entirely on knowing what it does not contain.<\/strong><br \/>\nUsed well, it turns a vague description of how someone walks into a set of positions and timings<br \/>\nthat two colleagues can look at together and discuss. Used badly, it becomes a colourful picture<br \/>\nthat gets over-interpreted, and the person reading it starts making claims the recording never<br \/>\nsupported. The difference between those two outcomes is not the equipment. It is whether the team<br \/>\nagreed, in advance, what questions the recording was there to answer.<\/p>\n<p>FOOTWORK LAB has manufactured foot assessment platforms since 2014 and has run its own plant in<br \/>\nRuichang, Jiangxi Province since 2018. In that time we have installed systems into clinics,<br \/>\nrehabilitation units, laboratories and retail settings, and we have watched the same handful of<br \/>\nmisunderstandings appear in almost every new installation. This article sets out what a dynamic<br \/>\npressure recording is, what it can reasonably be used for, and where the boundaries sit.<\/p>\n<h2>What a pressure map is, and what it is not<\/h2>\n<p>A pressure map is an array of sensing elements under the foot, recorded over time, presented as a<br \/>\npicture. Each element reports how much load is passing through its small area at a given moment.<br \/>\nColour is added for readability: warmer tones for higher load, cooler tones for lower. Animated or<br \/>\nsequenced over time, the map becomes a record of movement rather than a snapshot of position.<\/p>\n<p>What it is not is a picture of the foot. Buyers sometimes assume the image they see is a<br \/>\nphotograph or a shape capture, because it has the outline of a sole. It is a summary of load, drawn<br \/>\ninside a footprint boundary. Shape and load are related but distinct: two people with similar<br \/>\nfoot outlines can load their soles quite differently, which is precisely why pressure measurement<br \/>\nexists as a separate discipline.<\/p>\n<p>It is also not an instruction. The map describes where load sat at each moment of the recording.<br \/>\nIt does not state why, and it does not state what should happen next. Interpretation requires a<br \/>\nqualified professional who can combine the record with history, examination and context. Our own<br \/>\nwording on this is deliberate: the equipment produces measurements and images, and the professional<br \/>\ndraws the conclusion.<\/p>\n<h2>Why dynamic recording differs from a standing measurement<\/h2>\n<p>Standing pressure and moving pressure answer different questions, and the confusion between them<br \/>\ncauses more specification errors than any other single issue in this category.<\/p>\n<p>A standing recording captures the loading pattern while the body is still. It is quick, it is<br \/>\neasy to repeat, and it is highly comparable between sessions, which makes it useful for tracking<br \/>\nchange over time. What it cannot show is what happens during movement \u2014 and movement is when most<br \/>\nof the interesting loading events occur.<\/p>\n<p>A dynamic recording captures the sequence: contact, transfer of load along the sole, and push<br \/>\noff. It shows when load arrives under a region, how long it stays, and how it leaves. It can show<br \/>\nwhether the two sides behave symmetrically, whether load lingers in one area longer than elsewhere,<br \/>\nand whether the pattern changes as the person moves faster.<\/p>\n<p>Neither is more advanced. They are complementary, and a well-equipped assessment room usually<br \/>\nwants both, because the comparison itself is informative. A person whose standing pattern looks<br \/>\nunremarkable may show a very different picture once movement begins, and the reverse also occurs.<br \/>\nRecording only one and assuming it represents the other is the most common shortcut we see.<\/p>\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/footworklab.net\/wp-content\/uploads\/2026\/10\/069e5352a724d8f0fde2f60501977bce.jpg\" alt=\"Foot assessment equipment in use \u2014 F2\" loading=\"lazy\" title=\"\"><figcaption>FOOTWORK LAB F2. Measurement data only \u2014 clinical interpretation remains a professional judgement.<\/figcaption><\/figure>\n<h2>Reading a pressure map without over-reading it<\/h2>\n<p>New users tend to look for a conclusion in the image. Experienced users look for a question. The<br \/>\nshift is a matter of habit, and it can be taught in one session with three simple prompts.<\/p>\n<ul>\n<li><strong>Where is the load, and where is it not?<\/strong> Describe regions and their relative<br \/>\nloading before reaching for any explanation. Most of the useful information is a comparison between<br \/>\nareas, not an absolute value at a single point.<\/li>\n<li><strong>How does the pattern change over the sequence?<\/strong> A static-looking image hides<br \/>\ntiming. Watching the sequence reveals how long load remains in one region and how it transitions to<br \/>\nthe next.<\/li>\n<li><strong>How does this compare with the other side, and with a previous session?<\/strong><br \/>\nComparison is where pressure data earns its keep. A single recording in isolation is far less<br \/>\ninformative than the same person recorded at two points in time.<\/li>\n<\/ul>\n<p>Notice that none of those prompts ask what the pattern means. That is intentional. The map is at<br \/>\nits most useful when it is read as evidence that supports a conversation, and at its least<br \/>\nuseful when it is presented as the conversation&#8217;s conclusion.<\/p>\n<p>Terminology matters here for a practical reason. Load distribution, force-line alignment, centre<br \/>\nof pressure and gait cycle are measurable quantities with defined meanings. Borrowing clinical<br \/>\nvocabulary to describe an image, without the examination that would justify it, is how assessment<br \/>\ntools get a reputation for overclaiming \u2014 and that reputation damages every supplier in the<br \/>\ncategory, including the careful ones.<\/p>\n<p>A useful exercise for a new team is to describe three recordings in writing before discussing<br \/>\nthem out loud. The description should be limited to what is visible: load here, lighter there,<br \/>\nlonger duration on this side, a change of pattern at this point in the sequence. Only after the<br \/>\ndescription is agreed does the conversation move to possible explanations. Teams that adopt this<br \/>\nhabit early find that their recordings become genuinely comparable, because everyone is describing<br \/>\nthe same things in the same words, and disagreements become specific rather than general.<\/p>\n<p>It is also worth recording the limitations alongside the data. A short note on every session<br \/>\nstating the capture conditions, the number of passes and anything unusual during the recording<br \/>\nturns an image into a document. That note is what makes a recording reviewable six months later by<br \/>\nsomeone who was not in the room.<\/p>\n<h2>What the recording cannot tell you<\/h2>\n<p>Every measurement method has a boundary, and it is more honest to name our own than to let a<br \/>\nbuyer discover it after installation.<\/p>\n<p>A pressure recording does not identify a cause. Two people with identical loading patterns may<br \/>\narrive there for entirely different reasons, and the recording alone cannot separate them. It does<br \/>\nnot capture what happens inside a shoe unless the measurement is taken in a condition that allows<br \/>\nit. It does not describe the upper body, except indirectly through how load changes. And it does not<br \/>\nreplace examination, history or professional judgement \u2014 it complements them.<\/p>\n<p>There is also a practical boundary around the setting. A recording taken in a clinic corridor<br \/>\nduring a short walk describes that walk. It is evidence about a moment, not a verdict about a<br \/>\nperson&#8217;s movement in general. Teams that keep that distinction in mind use the equipment far more<br \/>\nproductively than teams that read each recording as a final answer.<\/p>\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/footworklab.net\/wp-content\/uploads\/2026\/10\/4117e1729b4855d194ceee1d358353e1.jpg\" alt=\"Foot assessment equipment in use \u2014 F2\" loading=\"lazy\" title=\"\"><figcaption>FOOTWORK LAB F2. Measurement data only \u2014 clinical interpretation remains a professional judgement.<\/figcaption><\/figure>\n<h2>Where dynamic mapping fits in a working week<\/h2>\n<p>Equipment that is bought and then left covered is almost always equipment that was specified<br \/>\nwithout a slot in the schedule. So before choosing a platform, describe where the recording sits in<br \/>\nthe working week.<\/p>\n<h3>Assessment and intake<\/h3>\n<p>A dynamic recording integrated into an initial assessment provides a baseline that later sessions<br \/>\ncan be compared against. The value appears months later, when a team can look at two recordings side<br \/>\nby side rather than relying on memory.<\/p>\n<h3>Product specification<\/h3>\n<p>Where a service supplies insoles or footwear, loading data informs how a design is specified, and<br \/>\nit provides a record of the reasoning. Our insole line is produced in the same plant as our<br \/>\nequipment, which is one reason we care about this link; the <a href=\"\/insole-categories\/\">insole<br \/>\ncategories page<\/a> shows how the design families are organised.<\/p>\n<h3>Rehabilitation and monitoring<\/h3>\n<p>Units monitoring change over a course of sessions use repeatable dynamic recordings as one of<br \/>\nseveral tracking inputs. Used consistently, the same capture routine across sessions is worth more<br \/>\nthan a more elaborate capture used irregularly.<\/p>\n<p>The practical test for this setting is whether the routine survives a busy week. If the recording<br \/>\nis only taken when there is spare time, it will be taken rarely, and rarely is not enough for<br \/>\ncomparison. Building the capture into the standard appointment, with a defined trigger, is what<br \/>\nkeeps the record intact across a course of sessions.<\/p>\n<h3>Sports and performance settings<\/h3>\n<p>Teams working with runners and athletes care about how loading changes as speed increases. That<br \/>\nis a different question from clinical assessment, and it usually justifies a walkway or platform<br \/>\nconfiguration rather than a single standing plate. The <a href=\"\/f5-lab-gait-running-platform\/\">F5-LAB<br \/>\ndynamic gait system<\/a> is the platform in our range built for that context.<\/p>\n<h2>Equipment decisions that follow from the job<\/h2>\n<p>Once the job is written down, the equipment conversation becomes much shorter. Five questions<br \/>\nsettle most of it.<\/p>\n<ol>\n<li><strong>What capture conditions does the room need?<\/strong> Standing, walking, running, in<br \/>\nshoes or barefoot. This single answer determines more about the platform than any other.<\/li>\n<li><strong>How much space is genuinely available?<\/strong> Walkway configurations need a run-up<br \/>\nand a run-out, and a room that cannot provide them will produce poor recordings even with good<br \/>\nequipment.<\/li>\n<li><strong>Who will operate it, and how often?<\/strong> A system used by many staff across<br \/>\ndifferent shifts needs a different interface from one used by a single specialist.<\/li>\n<li><strong>Where does the data need to end up?<\/strong> Ask about export formats, records<br \/>\nintegration and interface language before placing an order, not after.<\/li>\n<li><strong>What support exists in year two?<\/strong> Sensors, software and consumables all have a<br \/>\nlife span. Ask who supplies them and how quickly.<\/li>\n<\/ol>\n<p>can be agreed in a single meeting, which is a strong argument for holding that meeting before<br \/>\nquotations are requested rather than after. Buyers who arrive at a supplier with those five answers<br \/>\nalready written down consistently describe the process as quicker, and they are noticeably less<br \/>\nlikely to be sold a configuration their room cannot use.<\/p>\n<p>We answer the last question in public because it is the one buyers most often forget to ask. A<br \/>\ntwelve-month warranty on the machine covers non-human damage with free spare parts within that<br \/>\nscope. Support runs through a dedicated WhatsApp group with direct engineer access, remote<br \/>\nassistance where the setting allows, and over-the-air updates for connected units. None of that is<br \/>\nunusual; what is unusual is publishing it before being asked.<\/p>\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/footworklab.net\/wp-content\/uploads\/2026\/10\/f59d8f7d62d9ef4ade441e7f52e6ea7e.jpg\" alt=\"Foot assessment equipment in use \u2014 F2\" loading=\"lazy\" title=\"\"><figcaption>FOOTWORK LAB F2. Measurement data only \u2014 clinical interpretation remains a professional judgement.<\/figcaption><\/figure>\n<h2>Common mistakes we see in new installations<\/h2>\n<p>These are the recurring issues that come back to us in the months after a system goes live. All<br \/>\nof them are avoidable, and none of them are hardware faults.<\/p>\n<p><strong>Capturing too little.<\/strong> One recording per person, taken once, in a setting that<br \/>\ncannot be repeated. The data is then impossible to compare with anything, which removes most of its<br \/>\nvalue.<\/p>\n<p><strong>Changing the routine.<\/strong> A different walk length, a different surface, a different<br \/>\nnumber of passes between sessions. Variation in the method swamps variation in the person.<\/p>\n<p><strong>Reading the image alone.<\/strong> Presenting the map without examination findings sets<br \/>\nexpectations the equipment cannot meet, and it puts the operator in an uncomfortable position<br \/>\nlater.<\/p>\n<p><strong>Skipping the trial.<\/strong> Buying on the strength of a demonstration rather than<br \/>\nrunning the machine in the actual room. Our machine minimum order quantity is one unit precisely so<br \/>\nthat a single system can be trialled in place, and we would rather support that than push a larger<br \/>\nfirst order.<\/p>\n<p><strong>Forgetting the records question.<\/strong> A system that holds data beautifully but cannot<br \/>\nshare it will be duplicated manually, and manual duplication is where interest fades.<\/p>\n<h2>Frequently asked questions<\/h2>\n<div class=\"fwl-faq\">\n<h3>How is a dynamic pressure recording different from a standing one?<\/h3>\n<p>A standing recording captures the loading pattern while the body is still, which makes it quick<br \/>\nand easy to compare between sessions. A dynamic recording captures the sequence of loading during<br \/>\nmovement: when load arrives under a region, how long it remains, and how it transfers through push<br \/>\noff. They answer different questions and work best alongside each other.<\/p>\n<h3>Does the equipment tell us what a loading pattern means?<\/h3>\n<p>No. The system produces measurements, sequences and images. Deciding what those measurements mean<br \/>\nfor a particular person, and what should happen next, is a professional judgement made by a<br \/>\nqualified practitioner using the recording as one input among several.<\/p>\n<h3>Can the system record loading with shoes on?<\/h3>\n<p>Capture conditions are a specification decision rather than a constant property, and they should be<br \/>\nagreed before purchase. The important thing is consistency: whichever condition you choose, using<br \/>\nthe same one across sessions is what makes comparison possible.<\/p>\n<h3>How fast can your machines be produced and delivered?<\/h3>\n<p>Production capacity is roughly three to five machines per day, and every unit is tested in-house<br \/>\nwith a seven-day testing period before dispatch. Typical transit is six to seven working days by<br \/>\nexpress, ten to twelve by air, and thirty to thirty-five by sea.<\/p>\n<h3>Can we start with a single system and expand later?<\/h3>\n<p>Yes. The minimum order quantity for machines is one unit, and buyers frequently start with one<br \/>\nsystem in a single room before standardising across a group. Insoles can be mixed across models and<br \/>\nsizes within an order, with a lower minimum.<\/p>\n<h3>Do you supply the insoles that would be specified from this data?<\/h3>\n<p>We do. Our insole range covers everyday, sports and rehabilitation-oriented designs, and we<br \/>\naccept both ODM and OEM on insoles. Sample insoles ship within three days, and production runs at<br \/>\nroughly five hundred to one thousand pairs per day.<\/p>\n<h3>What certification and warranty apply?<\/h3>\n<p>Our documentation covers European Union certification and ISO quality system certification.<br \/>\nMachines carry a twelve-month warranty covering non-human damage, with free spare parts within that<br \/>\nscope, supported through a dedicated WhatsApp group with direct engineer access.<\/p>\n<\/div>\n<h2>What we would do next<\/h2>\n<p>Write the job down before you compare platforms: which capture conditions, which room, which<br \/>\nstaff, which records. Then ask each supplier for an anonymised sample report from a real session and<br \/>\ncompare those reports against your paragraph. If you need pressure and posture data in a dedicated<br \/>\nassessment room, our <a href=\"\/f2-fmp-gait-scanner\/\">F2 and FMP platform<\/a> is where most buyers<br \/>\nland, and the <a href=\"\/company-updates\/1328\/\">X5 deployment case<\/a> shows how one of these systems<br \/>\nwas installed abroad. If movement data is the priority, start with the<br \/>\n<a href=\"\/f5-lab-gait-running-platform\/\">F5-LAB dynamic gait system<\/a>, or read<br \/>\n<a href=\"\/news\/3022\/\">what a gait analysis report actually shows<\/a> first. Questions about<br \/>\nconfiguration, MOQ or support can go straight to the team through<br \/>\n<a href=\"\/contact\/\">our contact page<\/a>.<\/p>\n<p class=\"fwl-disclaimer\"><em>This article is intended for professional and educational reference.<br \/>\nIt is not medical advice. Foot assessment equipment produces measurements and images; clinical<br \/>\ninterpretation and any decision about care remain the responsibility of a qualified professional.<br \/>\nCertification scope is limited to the documentation we hold: European Union certification and ISO<br \/>\nquality system certification.<\/em><\/p>\n<div class=\"fwl-related\">\n<h2>Related reading<\/h2>\n<ul>\n<li><a href=\"\/news\/3022\/\">Inside a 3D gait analysis scanner report: what the data shows and what it cannot<\/a><\/li>\n<li><a href=\"\/news\/3002\/\">Setting up a gait analysis 3D scanner in a clinic: space, flow and the details nobody plans for<\/a><\/li>\n<li><a href=\"\/news\/1243\/\">Podiatry foot analysis tools: what each type of system is for<\/a><\/li>\n<li><a href=\"\/news\/2897\/\">Foot scanning machine for clinics: a buyer&#8217;s guide<\/a><\/li>\n<li><a href=\"\/core-technology\/\">How FOOTWORK LAB systems capture and process data<\/a><\/li>\n<\/ul>\n<\/div>\n<p><script type=\"application\/ld+json\">\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"@id\": \"https:\/\/footworklab.net\/dynamic-plantar-pressure-mapping\/#faqpage\",\n  \"mainEntity\": [\n    {\"@type\": \"Question\", \"name\": \"How is a dynamic pressure recording different from a standing one?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A standing recording captures the loading pattern while the body is still, which makes it quick and easy to compare between sessions. A dynamic recording captures the sequence of loading during movement: when load arrives under a region, how long it remains, and how it transfers through push off. They answer different questions and work best alongside each other.\"}},\n    {\"@type\": \"Question\", \"name\": \"Does the equipment tell us what a loading pattern means?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. The system produces measurements, sequences and images. Deciding what those measurements mean for a particular person, and what should happen next, is a professional judgement made by a qualified practitioner using the recording as one input among several.\"}},\n    {\"@type\": \"Question\", \"name\": \"Can the system record loading with shoes on?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Capture conditions are a specification decision rather than a constant property, and they should be agreed before purchase. The important thing is consistency: whichever condition you choose, using the same one across sessions is what makes comparison possible.\"}},\n    {\"@type\": \"Question\", \"name\": \"How fast can your machines be produced and delivered?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Production capacity is roughly three to five machines per day, and every unit is tested in-house with a seven-day testing period before dispatch. Typical transit is six to seven working days by express, ten to twelve by air, and thirty to thirty-five by sea.\"}},\n    {\"@type\": \"Question\", \"name\": \"Can we start with a single system and expand later?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The minimum order quantity for machines is one unit, and buyers frequently start with one system in a single room before standardising across a group. Insoles can be mixed across models and sizes within an order, with a lower minimum.\"}},\n    {\"@type\": \"Question\", \"name\": \"Do you supply the insoles that would be specified from this data?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"We do. Our insole range covers everyday, sports and rehabilitation-oriented designs, and we accept both ODM and OEM on insoles. Sample insoles ship within three days, and production runs at roughly five hundred to one thousand pairs per day.\"}},\n    {\"@type\": \"Question\", \"name\": \"What certification and warranty apply?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Our documentation covers European Union certification and ISO quality system certification. Machines carry a twelve-month warranty covering non-human damage, with free spare parts within that scope, supported through a dedicated WhatsApp group with direct engineer access.\"}}\n  ]\n}\n<\/script><\/p>\n","protected":false},"excerpt":{"rendered":"<p>A dynamic pressure map is evidence, not a verdict. How to record it consistently and how to keep interpretation inside its limits.<\/p>","protected":false},"author":1,"featured_media":3105,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_monsterinsights_skip_tracking":false,"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[8],"tags":[],"class_list":["post-3074","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-news"],"_links":{"self":[{"href":"https:\/\/footworklab.net\/fr\/wp-json\/wp\/v2\/posts\/3074","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/footworklab.net\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/footworklab.net\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/footworklab.net\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/footworklab.net\/fr\/wp-json\/wp\/v2\/comments?post=3074"}],"version-history":[{"count":2,"href":"https:\/\/footworklab.net\/fr\/wp-json\/wp\/v2\/posts\/3074\/revisions"}],"predecessor-version":[{"id":3108,"href":"https:\/\/footworklab.net\/fr\/wp-json\/wp\/v2\/posts\/3074\/revisions\/3108"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/footworklab.net\/fr\/wp-json\/wp\/v2\/media\/3105"}],"wp:attachment":[{"href":"https:\/\/footworklab.net\/fr\/wp-json\/wp\/v2\/media?parent=3074"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/footworklab.net\/fr\/wp-json\/wp\/v2\/categories?post=3074"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/footworklab.net\/fr\/wp-json\/wp\/v2\/tags?post=3074"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}