{"id":3081,"date":"2026-10-15T14:40:45","date_gmt":"2026-10-16T02:40:45","guid":{"rendered":"https:\/\/footworklab.net\/?p=3081"},"modified":"2026-10-15T14:40:45","modified_gmt":"2026-10-16T02:40:45","slug":"insoles-for-shoes","status":"publish","type":"post","link":"https:\/\/footworklab.net\/fr\/news\/3081\/","title":{"rendered":"Insoles for Shoes: How to Specify a Pair That Suits the Footwear You Supply"},"content":{"rendered":"<div class=\"fwl-author\">\n<p><strong>About the author<\/strong> \u2014 FOOTWORK LAB is a manufacturer of foot<br \/>\nassessment equipment and custom orthotic insoles, based in Ruichang, Jiangxi Province, China.<br \/>\nFounded in 2014, with its own production plant since 2018. Certified to European Union and ISO<br \/>\nquality system standards. <a href=\"\/our-factory\/\">See the factory<\/a> or<br \/>\n<a href=\"\/certificate\/\">view certification<\/a>.<\/p>\n<\/div>\n<p class=\"fwl-lead\"><strong>Insoles for shoes fail for reasons that have very little to do with the<br \/>\nfoot.<\/strong> A pair can be beautifully formed, correctly measured and made from good material, and<br \/>\nstill end up in a drawer because it does not sit properly inside the footwear it was bought for.<br \/>\nThe volume available inside a shoe is a hard constraint, and it is the constraint most often<br \/>\noverlooked when a buyer specifies a design. Getting this right is not complicated, but it does<br \/>\nrequire a short conversation about footwear before the conversation about materials.<\/p>\n<p>FOOTWORK LAB manufactures custom orthotic insoles alongside our foot assessment equipment, from<br \/>\nthe same plant in Ruichang, Jiangxi Province, where we have produced since 2018. Insoles are a<br \/>\nvolume business for us: production runs at roughly five hundred to one thousand pairs per day, and<br \/>\nwe ship samples within three days. That volume gives us a clear view of which specification<br \/>\nquestions decide whether a pair actually gets worn, and which ones turn out to be decoration. This<br \/>\narticle sets out the former.<\/p>\n<h2>Why the shoe matters as much as the foot<\/h2>\n<p>An insole occupies space that the shoe was not designed to give away. Every millimetre of<br \/>\nthickness added under the sole comes out of the volume available for the foot, and that volume is<br \/>\nalready allocated to toes, instep and heel. Exceed it and the consequences are predictable: the<br \/>\nfoot sits too high in the shoe, the heel lifts, the upper feels tight across the instep, and the<br \/>\nwearer stops using the pair within a week.<\/p>\n<p>This is why an insole specification has two halves rather than one. The first half describes the<br \/>\nfoot: outline, arch profile, length, width, and how load distributes. The second half describes the<br \/>\nfootwear: how much depth is available, whether the existing footbed can be removed, how the shoe is<br \/>\nconstructed, and what kind of activity it is used for. A design that satisfies only the first half<br \/>\nis a laboratory object. A design that satisfies both is a product.<\/p>\n<p>The footwear half is also where buyers get the most value from their supplier. A factory that<br \/>\nproduces insole families at volume sees the same footwear categories repeatedly, and it can usually<br \/>\nsay in one message whether a proposed design will sit inside a particular shoe. That answer costs<br \/>\nnothing and saves a great deal of frustration.<\/p>\n<p>It is worth adding that the fit question is separate from the measurement question. Equipment can<br \/>\ndescribe the foot with considerable precision, and none of that precision compensates for an insole<br \/>\nthat does not fit the shoe. Measurement and fit are two gates, and a pair has to pass both.<\/p>\n<h2>The three measurements that decide whether an insole fits a shoe<\/h2>\n<p>When we review a specification with a new client, three quantities come up almost immediately.<br \/>\nNone of them require special equipment to discuss, and all of them determine the outcome.<\/p>\n<ul>\n<li><strong>Available depth.<\/strong> How much room exists between the foot and the shoe&#8217;s own<br \/>\nfootbed once any removable layer is taken out. This is the governing constraint, because it caps the<br \/>\ntotal thickness of the insole regardless of what the foot data suggests.<\/li>\n<li><strong>Sole outline and trim.<\/strong> The insole has to follow the internal shape of the shoe,<br \/>\nnot the outline of the foot. A foot outline placed inside a shoe with a different last will buckle at<br \/>\nthe edges or leave a gap, and both are felt immediately by the wearer.<\/li>\n<li><strong>Intended activity.<\/strong> A walking shoe, a training shoe and a competition shoe<br \/>\npresent different requirements, and the same foot may need different answers for each. Activity<br \/>\ndecides both the material choice and how the design is formed.<\/li>\n<\/ul>\n<p>Two practical points follow from these three. First, if the shoe has a removable footbed, remove<br \/>\nit and measure what is left; the removable layer is usually where the depth comes from. Second, if<br \/>\na client supplies footwear from more than one manufacturer, handle each family as its own<br \/>\nspecification rather than assuming a single design will serve both.<\/p>\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/footworklab.net\/wp-content\/uploads\/2026\/10\/70e8e1c0951edf5046b29cafabe65cf2.jpg\" alt=\"Foot assessment equipment in use \u2014 INSOLE\" loading=\"lazy\" title=\"\"><figcaption>FOOTWORK LAB INSOLE. Measurement data only \u2014 clinical interpretation remains a professional judgement.<\/figcaption><\/figure>\n<h2>Matching design families to footwear categories<\/h2>\n<p>Most insole ranges are organised into families rather than individual products, because footwear<br \/>\nand activity cluster in recognisable ways. Our own range follows that pattern, and you can see the<br \/>\ngroupings on the <a href=\"\/insole-categories\/\">insole categories page<\/a>. Understanding the logic<br \/>\nhelps a buyer ask for the right family instead of describing a product from scratch.<\/p>\n<h3>Everyday footwear<\/h3>\n<p>The largest category by volume. The priorities here are comfortable depth, a design that does not<br \/>\nrequire the wearer to change shoe size, and durability across months of daily use. Design decisions<br \/>\nthat add bulk are usually rejected by the wearer regardless of their technical merit.<\/p>\n<h3>Sports and training footwear<\/h3>\n<p>Here the priorities shift towards how the design behaves during movement, how it handles<br \/>\nrepeated loading, and how it interacts with the shoe&#8217;s own midsole. Cushioning, resilience and<br \/>\nweight all matter more than in the everyday category.<\/p>\n<h3>Rehabilitation and care settings<\/h3>\n<p>Designs specified within a supervised setting have the advantage of professional oversight, which<br \/>\nmeans the specification can be more specific and the wearer can be guided through a period of<br \/>\nadaptation. This is also the setting where records matter most, because a course of care involves<br \/>\nseveral pairs over time and comparability between them is useful.<\/p>\n<h3>Specialist and accommodation requirements<\/h3>\n<p>Some footwear falls outside the standard categories: unusually shallow dress shoes, safety<br \/>\nfootwear with limited internal volume, or shoes with unusual lasts. These need individual discussion<br \/>\nrather than a catalogue answer, and a factory relationship is worth more here than a website with a set catalogue.<\/p>\n<h2>What to confirm with a supplier before ordering<\/h2>\n<p>Five confirmations prevent almost every insole order problem we encounter. They are worth<br \/>\nrequesting in writing, because they form a shared record that both sides can return to.<\/p>\n<ol>\n<li><strong>Minimum order quantity and mixing rules.<\/strong> Our insole minimum is two hundred<br \/>\npairs, and models and sizes can be mixed within an order, which lets a clinic or retailer trial a<br \/>\nrange rather than commit to one design.<\/li>\n<li><strong>Sample lead time and cost basis.<\/strong> Samples leave us within three days. Ask how<br \/>\nsamples are supplied and what the sample represents, because a sample that is not produced under the<br \/>\nsame process as the bulk order tells you very little.<\/li>\n<li><strong>Customisation options.<\/strong> We accept both ODM and OEM on insoles. Confirm which<br \/>\nparts of the design are open to change \u2014 dimensions, materials, surface finish, branding,<br \/>\npackaging \u2014 and which are not.<\/li>\n<li><strong>Quality checks and inspection.<\/strong> Ask what is inspected, at which stage, and what<br \/>\nhappens to a batch that fails. A supplier who cannot describe their inspection process in plain<br \/>\nlanguage probably does not have one.<\/li>\n<li><strong>Capacity and scheduling.<\/strong> Our capacity is roughly five hundred to one thousand<br \/>\npairs per day. Ask how a peak season affects lead time, and ask early, because capacity is finite<br \/>\neverywhere.<\/li>\n<\/ol>\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/footworklab.net\/wp-content\/uploads\/2026\/10\/6ac9114696438b93110e20a3810fd5eb.jpg\" alt=\"Foot assessment equipment in use \u2014 INSOLE\" loading=\"lazy\" title=\"\"><figcaption>FOOTWORK LAB INSOLE. Measurement data only \u2014 clinical interpretation remains a professional judgement.<\/figcaption><\/figure>\n<p>One habit worth adopting from the start is to write the specification as a short document rather than a series of messages. Two pages is enough: the footwear to be served, the volume available in each, the activity, the design family chosen, and the quantity pattern expected over a year. A written specification is what makes a second order match the first, and it is also what makes a dispute resolvable, because both sides are working from the same description rather than from memory.<\/p>\n<h2>Materials and forming: what affects how a pair wears<\/h2>\n<p>Material choice is often presented as the technical heart of insole supply. It matters, but it<br \/>\nmatters in service of the three fit constraints described earlier, not as an independent virtue. A<br \/>\nsophisticated material in a design that does not fit the shoe will still not be worn.<\/p>\n<p>Broadly, the choices fall into a few groups. Cushioning layers absorb and distribute load and are<br \/>\nselected for their resilience over time. Supportive layers provide structure and maintain the shape<br \/>\nof the arch region. Top covers handle contact with the foot and influence how the pair feels and how<br \/>\nlong it lasts. Forming processes shape the assembly to the intended profile and determine how<br \/>\nconsistently that profile is reproduced across a production run.<\/p>\n<p>Three questions cut through the marketing. How does the material behave after months of use<br \/>\nrather than on day one? How consistent is the finished profile between pairs in the same batch? And<br \/>\nwhat happens to the assembly when the intended activity pushes it repeatedly? A supplier who can<br \/>\nanswer those three has a genuinely engineered product. A supplier who answers only with material<br \/>\nnames has a catalogue.<\/p>\n<p>It is also worth being explicit about what insole supply is not. An insole is a support and<br \/>\nalignment product. It is not a mechanism that changes the structure of a foot, and it is not a<br \/>\nsubstitute for professional judgement about a person&#8217;s care. Where a client&#8217;s requirement moves into<br \/>\nthat territory, the appropriate response is to refer the question to the qualified professional<br \/>\nhandling that person, not to adjust the product specification.<\/p>\n<h2>Manufacturing, inspection and what we do not claim<\/h2>\n<p>Insole production is a volume process with a quality system around it, and the quality system is<br \/>\nwhat separates a factory from an assembly bench. Our inspection routine begins with incoming<br \/>\nmaterials, continues through forming, and ends with a check of the finished pair against the<br \/>\nspecified design. Where a batch does not conform, it is addressed at the point of detection rather<br \/>\nthan shipped with a note.<\/p>\n<p>The machinery side of our business is managed the same way, with every unit tested in-house<br \/>\nbefore dispatch during a seven-day testing period. That parallel is deliberate: both lines feed the<br \/>\nsame customers, and a clinic buying insoles is often also buying the equipment that informs them.<\/p>\n<p>On claims, we keep to what we can evidence. Our documentation covers European Union certification<br \/>\nand ISO quality system certification, and we describe that scope exactly rather than translating it<br \/>\ninto something broader. We describe what our products do and are explicit about what they do not do.<br \/>\nAnd we decline to quote figures in a general article, because a number given without knowledge of<br \/>\nthe specification, volume, packaging and destination would mislead rather than inform. Buyers who<br \/>\nwant a quotation get one against their actual requirement.<\/p>\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/footworklab.net\/wp-content\/uploads\/2026\/10\/da73f0fbee92b049f50ced026ec112a7.jpg\" alt=\"Foot assessment equipment in use \u2014 INSOLE\" loading=\"lazy\" title=\"\"><figcaption>FOOTWORK LAB INSOLE. Measurement data only \u2014 clinical interpretation remains a professional judgement.<\/figcaption><\/figure>\n<h2>A specification checklist you can send to any supplier<\/h2>\n<p>The most efficient insole enquiry we receive contains eight lines. Not because eight lines are<br \/>\nmagic, but because each one removes an assumption that would otherwise be guessed.<\/p>\n<ol>\n<li>The footwear categories to be served, with an example model for each.<\/li>\n<li>Whether the footwear has a removable footbed, and what remains underneath it.<\/li>\n<li>The intended activity for each category.<\/li>\n<li>Whether the design is to be based on measured foot data, and if so, which measurements.<\/li>\n<li>Any requirement for identical designs across multiple sizes.<\/li>\n<li>Branding, packaging and labelling requirements.<\/li>\n<li>Expected order quantity and the intended pattern over a year.<\/li>\n<li>Any requirement that the pair carry a specific marking or documentation.<\/li>\n<\/ol>\n<p>Send that to two or three suppliers and compare the replies rather than the prices. A supplier<br \/>\nwho answers all eight specifically is telling you how the order will go. A supplier who answers<br \/>\nfour and asks for a call about the rest is also giving you useful information.<\/p>\n<p>Where a client is also specifying equipment, the two conversations belong together. Pressure and<br \/>\nalignment data informs how a design is specified, which is one reason we produce both; the<br \/>\n<a href=\"\/core-technology\/\">technology overview<\/a> explains how measurement and forming connect in<br \/>\nour own workflow.<\/p>\n<h2>Frequently asked questions<\/h2>\n<div class=\"fwl-faq\">\n<h3>What is your minimum order quantity for insoles?<\/h3>\n<p>Two hundred pairs, and models and sizes can be mixed within a single order. That structure is<br \/>\ndeliberate: it lets a clinic or retailer trial a range of designs across real footwear instead of<br \/>\ncommitting a full order to one specification.<\/p>\n<h3>How quickly can I receive samples?<\/h3>\n<p>Samples ship within three days. Ask for them to be produced under the same process that will make<br \/>\nthe bulk order, otherwise the sample tells you less than you think about what will arrive later.<\/p>\n<h3>Do you offer ODM and OEM on insoles?<\/h3>\n<p>Both. ODM allows the design to be adapted from our existing families, while OEM is built to your<br \/>\nown specification. The practical difference is where the design decision sits, and we are happy to<br \/>\ndiscuss which suits your business.<\/p>\n<h3>Can you make insoles for shoes with very little internal volume?<\/h3>\n<p>Usually yes, but the design has to start from the actual volume available rather than from the<br \/>\nfoot measurement alone. If you tell us the footwear and whether the footbed is removable, we can<br \/>\nadvise on what is realistic before anything is drawn.<\/p>\n<h3>What is your production capacity and lead time?<\/h3>\n<p>Insole capacity is roughly five hundred to one thousand pairs per day. Samples take three days,<br \/>\nand bulk lead time depends on specification and quantity, so it is worth confirming at enquiry<br \/>\nstage rather than assuming a standard window.<\/p>\n<h3>How are insoles inspected before shipping?<\/h3>\n<p>Inspection runs from incoming materials through forming to a check of the finished pair against<br \/>\nthe specified design. Batches that do not conform are dealt with at the point of detection rather<br \/>\nthan shipped with a note attached.<\/p>\n<h3>Do you supply the equipment that produces the foot data for a design?<\/h3>\n<p>Yes. We manufacture foot assessment equipment as well as insoles, and the minimum order quantity<br \/>\nfor machines is a single unit, so a clinic can begin with one system and one insole family and<br \/>\nexpand from there.<\/p>\n<\/div>\n<h2>What we would do next<\/h2>\n<p>Start with the footwear rather than the design. Send the eight-line checklist to your shortlisted<br \/>\nsuppliers, ask each for a sample produced under the bulk process, and compare the replies on<br \/>\nspecificity. If you are also specifying equipment, read<br \/>\n<a href=\"\/news\/3012\/\">how arch support is specified from foot data<\/a> and<br \/>\n<a href=\"\/news\/3017\/\">what goes into an arch support insole<\/a> before you decide the order of<br \/>\npurchase. Our <a href=\"\/insole-categories\/\">insole range<\/a> is organised by use case, and the<br \/>\n<a href=\"\/faq\/\">FAQ page<\/a> answers the commercial questions openly. For a specification discussion<br \/>\nagainst your own footwear list, <a href=\"\/contact\/\">contact the team<\/a>.<\/p>\n<p class=\"fwl-disclaimer\"><em>This article is intended for professional and educational reference.<br \/>\nIt is not medical advice. Foot assessment equipment produces measurements and images; clinical<br \/>\ninterpretation and any decision about care remain the responsibility of a qualified professional.<br \/>\nCertification scope is limited to the documentation we hold: European Union certification and ISO<br \/>\nquality system certification.<\/em><\/p>\n<div class=\"fwl-related\">\n<h2>Related reading<\/h2>\n<ul>\n<li><a href=\"\/news\/3007\/\">Ordering custom orthotic insoles: what to confirm first<\/a><\/li>\n<li><a href=\"\/news\/3017\/\">What really goes into an arch support insole: materials, forming and inspection<\/a><\/li>\n<li><a href=\"\/news\/1257\/\">Arch support insoles: what buyers compare<\/a><\/li>\n<li><a href=\"\/news\/3012\/\">How arch support is specified: from foot data to formed insole<\/a><\/li>\n<li><a href=\"\/insole-categories\/\">FOOTWORK LAB insole categories<\/a><\/li>\n<\/ul>\n<\/div>\n<p><script type=\"application\/ld+json\">\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"@id\": \"https:\/\/footworklab.net\/insoles-for-shoes\/#faqpage\",\n  \"mainEntity\": [\n    {\"@type\": \"Question\", \"name\": \"What is your minimum order quantity for insoles?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Two hundred pairs, and models and sizes can be mixed within a single order. That structure is deliberate: it lets a clinic or retailer trial a range of designs across real footwear instead of committing a full order to one specification.\"}},\n    {\"@type\": \"Question\", \"name\": \"How quickly can I receive samples?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Samples ship within three days. Ask for them to be produced under the same process that will make the bulk order, otherwise the sample tells you less than you think about what will arrive later.\"}},\n    {\"@type\": \"Question\", \"name\": \"Do you offer ODM and OEM on insoles?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Both. ODM allows the design to be adapted from our existing families, while OEM is built to your own specification. The practical difference is where the design decision sits, and we are happy to discuss which suits your business.\"}},\n    {\"@type\": \"Question\", \"name\": \"Can you make insoles for shoes with very little internal volume?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Usually yes, but the design has to start from the actual volume available rather than from the foot measurement alone. If you tell us the footwear and whether the footbed is removable, we can advise on what is realistic before anything is drawn.\"}},\n    {\"@type\": \"Question\", \"name\": \"What is your production capacity and lead time?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Insole capacity is roughly five hundred to one thousand pairs per day. Samples take three days, and bulk lead time depends on specification and quantity, so it is worth confirming at enquiry stage rather than assuming a standard window.\"}},\n    {\"@type\": \"Question\", \"name\": \"How are insoles inspected before shipping?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Inspection runs from incoming materials through forming to a check of the finished pair against the specified design. Batches that do not conform are dealt with at the point of detection rather than shipped with a note attached.\"}},\n    {\"@type\": \"Question\", \"name\": \"Do you supply the equipment that produces the foot data for a design?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. We manufacture foot assessment equipment as well as insoles, and the minimum order quantity for machines is a single unit, so a clinic can begin with one system and one insole family and expand from there.\"}}\n  ]\n}\n<\/script><\/p>\n","protected":false},"excerpt":{"rendered":"<p>An insole occupies space the shoe was not designed to give away. The three constraints that decide whether a design is ever worn.<\/p>","protected":false},"author":1,"featured_media":3078,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_monsterinsights_skip_tracking":false,"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[8],"tags":[],"class_list":["post-3081","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-news"],"_links":{"self":[{"href":"https:\/\/footworklab.net\/fr\/wp-json\/wp\/v2\/posts\/3081","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/footworklab.net\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/footworklab.net\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/footworklab.net\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/footworklab.net\/fr\/wp-json\/wp\/v2\/comments?post=3081"}],"version-history":[{"count":1,"href":"https:\/\/footworklab.net\/fr\/wp-json\/wp\/v2\/posts\/3081\/revisions"}],"predecessor-version":[{"id":3082,"href":"https:\/\/footworklab.net\/fr\/wp-json\/wp\/v2\/posts\/3081\/revisions\/3082"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/footworklab.net\/fr\/wp-json\/wp\/v2\/media\/3078"}],"wp:attachment":[{"href":"https:\/\/footworklab.net\/fr\/wp-json\/wp\/v2\/media?parent=3081"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/footworklab.net\/fr\/wp-json\/wp\/v2\/categories?post=3081"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/footworklab.net\/fr\/wp-json\/wp\/v2\/tags?post=3081"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}